ホームページ Protein Tyrosine Kinase c-Kit inhibitor - CSF-1R inhibitor - VEGFR inhibitor OSI-930 For research use only.

OSI-930

OSI-930 is a potent inhibitor of Kit (c-Kit), KDR and CSF-1R with IC50 of 80 nM, 9 nM and 15 nM, respectively; also potent to Flt-1, c-Raf and Lck and low activity against PDGFRα/β, Flt-3 and Abl. Phase 1.

OSI-930化学構造

CAS No. 728033-96-3

サイズ 価格(税別) 在庫状況
JPY 26900 国内在庫あり

代表番号: 045-509-1970|電子メール：[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例（6）

カスタマーフィードバック3个实验数据

製品安全説明書

現在のバッチを見る： 純度： 99.92%
99.92

OSI-930関連製品

シグナル伝達経路

c-Kit Signaling Pathways

c-Kitシグナル伝達経路

c-Kit阻害剤の選択性比較

生物活性

製品説明 OSI-930 is a potent inhibitor of Kit (c-Kit), KDR and CSF-1R with IC50 of 80 nM, 9 nM and 15 nM, respectively; also potent to Flt-1, c-Raf and Lck and low activity against PDGFRα/β, Flt-3 and Abl. Phase 1.
Targets
FLT1 [1]
(Cell-free assay)		 KDR [1]
(Cell-free assay)		 CSF-1R [1]
(Cell-free assay)		 LCK [1]
(Cell-free assay)		 C-Raf [1]
(Cell-free assay)		 もっとクリックする
8 nM 9 nM 15 nM 22 nM 41 nM
In Vitro
In vitro OSI-930 inhibits the cell proliferation in the HMC-1 cell line with IC50 of 14 nM without significant effect on growth of the COLO-205 cell line that does not express a constitutively active mutant receptor tyrosine kinase. Moreover, OSI-930 also induces apoptosis in HMC-1 cell line with EC50 of 34 nM. [1] A recent study shows that OSI-930 inactivates purified, recombinant cytochrome P450 (P450) 3A4 with a Ki of 24 μM in a time- and concentration-dependent mode. [2]
Kinase Assay Protein kinase assays
Protein kinase assays are either done in-house by ELISA-based assay methods (Kit, KDR, PDGFRα, and PDGFRβ) or by a radiometric method. In-house ELISA assays used poly(Glu:Tyr) as the substrate bound to the surface of 96-well assay plates; phosphorylation is then detected using an antiphosphotyrosine antibody conjugated to HRP. The bound antibody is then quantitated using ABTS as the peroxidase substrate by measuring the absorbance at 405/490 nm. All assays uses purified recombinant kinase catalytic domains that are either expressed in insect cells or in bacteria. The Kit and EGFR protein used for in-house assays are prepared internally; other enzymes are obtained. Recombinant Kit protein is expressed as an NH2-terminal glutathione S-transferase fusion protein in insect cells and is initially purified as a nonphosphorylated (nonactivated) enzyme with a relatively high Km for ATP (400 μM). In some assays, an activated (tyrosine phosphorylated) form of the enzyme is prepared by incubation with 1 mM ATP for 1 hour at 30 °C. The phosphorylated protein is then passed through a desalting column to remove the majority of the ATP and stored at −80 °C in buffer containing 50% glycerol. The resultant preparation has a considerably higher specific activity and a lower Km for ATP (25 μM) than the initial nonphosphorylated preparation. The inhibition of Kit autophosphorylation by OSI-930 is assayed by incubation of the nonphosphorylated enzyme at 30 °C in the presence of 200 μM ATP and various concentrations of OSI-930. The reaction is stopped by removal of aliquots into SDS-PAGE sample buffer followed by heating to 100 °C for 5 minutes. The degree of phosphorylation of Kit is then determined by immunoblotting for both total Kit and phosphorylated Kit.
細胞実験 細胞株 HMC-1 and COLO-205
濃度 0--1 μM
反応時間 48 hours
実験の流れ For assays of cell proliferation and apoptosis, cells are seeded into 96-well plates and incubated for 2 to 3 days in the presence of OSI-930 at various concentrations. Inhibition of cell growth is determined by luminescent quantitation of the intracellular ATP content using CellTiterGlo. Induction of caspase-dependent apoptosis by OSI-930 is quantitated by an enzymatic caspase 3/7 assay. Inhibition of angiogenesis by OSI-930 is monitored using the rat aortic ring endothelial sprout outgrowth assay. Sections of aorta are prepared from CO2-euthanized male rats and cultured in vitro in a collagen matrix in the presence or absence of OSI-930. The collagen matrix is prepared from type 1 rat tail collagen solubilized in 0.1% acetic acid at 3 mg/mL, which is combined with 0.125 volume collagen buffer (0.05 N NaOH, 200 mM HEPES, 260 mM NaHCO3), 0.125 volume of medium 199, 0.0125 volume of 1 M NaOH, and 1% GlutaMax. Aortic rings are embedded in 0.4 mL of this matrix in six-well plates, to which 0.5 mL endothelial basal medium and the appropriate amount of OSI-930 is added; the rings are then incubated for 10 days and the resultant angiogenic sprout outgrowth is digitally quantitated from images by measurement of the sprout-containing area within a series of concentric rings around the aortic tissue area.
In Vivo
In Vivo OSI-930, administrated at the maximally efficacious dose of 200 mg/kg by oral gavage, exhibits potent antitumor activity in a broad range of preclinical xenograft models including HMC-1, NCI-SNU-5, COLO-205 and U251 xenograft models. [1]
動物実験 動物モデル HMC-1, NCI-SNU-5, COLO-205 and U251 cells are injected s.c. into the right flank of CD1 nu/nu mice.
投与量 ≤200 mg/kg
投与経路 Administered via p.o.
NCT Number Recruitment Conditions Sponsor/Collaborators Start Date Phases
NCT00513851 Completed
Advanced Solid Tumors
Astellas Pharma Inc|OSI Pharmaceuticals
 April 2006 Phase 1

化学情報

分子量 443.44 化学式

C22H16F3N3O2S
CAS No. 728033-96-3 SDF Download OSI-930 SDFをダウンロードする
Smiles C1=CC=C2C(=C1)C(=CC=N2)CNC3=C(SC=C3)C(=O)NC4=CC=C(C=C4)OC(F)(F)F
保管

In vitro
Batch:

DMSO : 89 mg/mL ( (200.7 mM)； 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 3 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ１：実験データを入力してください。（実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します）

mg/kg g μL 匹

ステップ２：投与溶媒の組成を入力してください。（ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください）

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果：

投与溶媒濃度： mg/ml;

DMSOストック溶液調製方法： mg 試薬を μL DMSOに溶解する（濃度 mg/mL, 注：濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法：Take μL DMSOストック溶液に μL PEG300，を加え、完全溶解後μL Tween 80，を加えて完全溶解させた後 μL ddH2O，を加え完全に溶解させます。

投与溶媒調製方法：μL DMSOストック溶液に μL Corn oil，を加え、完全溶解。

注意：１.ストック溶液に沈殿、混濁などがないことをご確認ください；
２.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: OSI-930を買う | OSI-930 ic50 | OSI-930供給者 | OSI-930を購入する | OSI-930費用 | OSI-930生産者 | オーダーOSI-930 | OSI-930化学構造 | OSI-930分子量 | OSI-930代理店