PIK-93

PIK-93 is the first potent, synthetic PI4K (PI4KIIIβ) inhibitor with IC50 of 19 nM; shown to inhibit PI3Kα with IC50 of 39 nM.

PIK-93化学構造

CAS No. 593960-11-3

サイズ 価格(税別) 在庫状況
JPY 30200 国内在庫あり
JPY 96600 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(10)

カスタマーフィードバック1个实验数据

製品安全説明書

現在のバッチを見る: S148901 DMSO] 78 mg/mL] false] Ethanol] 1 mg/mL] false] Water] Insoluble] false 純度: 99.81%
99.81

PIK-93関連製品

PI4K阻害剤の選択性比較

生物活性

製品説明 PIK-93 is the first potent, synthetic PI4K (PI4KIIIβ) inhibitor with IC50 of 19 nM; shown to inhibit PI3Kα with IC50 of 39 nM.
特性 A novel and potent inhibitor of both PI3Kγ and PI4KIIIβ.
Targets
p110γ [1] PI4KIIIβ [1] p110α [1] DNA-PK [1] p110δ [1] もっとクリックする
16 nM 19 nM 39 nM 64 nM 120 nM
In Vitro
In vitro PIK-93 inhibits PI3Kγ and PI4KIIIβ, with IC50 values of 16 nM and 19 nM, respectively. PIK-93 also inhibits other members of PI3Ks, including PI3Kα, β, and δ, with IC50 values of 39 nM, 0.59 μM, and 0.12 μM, respectively. PIK-93 shows no obvious inhibitory effect against a panel of other kinases, even at a concentration of 10 μM. [1] In differentiated HL60 (dHL60) cells, PIK-93 (0.5 μM–1 μM) impairs consolidation and stability of the leading edge formed after treatment with uniform f-Met-Leu-Phe (fMLP). PIK-93 alters the localization, but not the amount, of the fMLP-dependent accumulation of total F-actin. In fMLP gradients, PIK-93 reduces the chemotactic index and triples the cells' turning frequency. [2] In COS-7 cells, PIK-93 (250 nM) effectively abrogates the accumulation of CERT-PH domain and FL-Cer in Golgi. PIK-93 of the same concentration also significantly inhibits the conversion of [3H]serine-labeled endogenous ceramide to sphingomyelin. These facts indicate a key role of PI4KIIIβ in ceramide transport between the ER and Golgi, as well as in the regulation of spingomyelin synthesis. [3] In T6.11 cells, PIK-93 (300 nM) reduces carbachol-induced translocation of TRPC6 to the plasma membrane and net Ca2+ entry. [4] A recent report shows that PIK-93 has anti-enterovirus effects, as revealed by its inhibition of both poliovirus (PV) and hepatitis C virus (HCV) replication, with EC50 values of 0.14 µM and 1.9 µM, respectively. [5]
Kinase Assay Assay of PI3Ks
IC50 values are measured using a standard TLC assay for lipid kinase activity. Kinase reactions are performed by preparing areaction mixture containing kinase, PIK-93 (2% DMSO final concentration), buffer (25 mM HEPES, pH 7.4, 10 mM MgCl2), and freshly sonicated phosphatidylinositol (100 µg/ml). Reactions are initiated by the addition of ATP containing 10 µCi of γ-32P-ATP to a final concentration 10 or 100 µM, and allowed to proceed for 20 min at room temperature. For TLC analysis, reactions are then terminated by the addition of 105 µL 1N HCl followed by 160 µL CHCl3:MeOH (1:1). The biphasic mixture is vortexed, briefly centrifuged, and the organic phase transferred to a new tube using a gel loading pipette tip precoated with CHCl3. This extract is spotted on TLC plates and developed for 3 hours–4 hours in a 65:35 solution of n-propanol:1M acetic acid. The TLC plates are then dried, exposed to a phosphorimager screen, and quantitated. Kinase activity is typically measured at 10–12 concentrations of PIK-93 representing two-fold dilutions from the highest concentration of 100 μM.
細胞実験 細胞株 Differentiated HL60 (dHL60) cells
濃度 0.5 μM–1 μM
反応時間 40 min
実験の流れ For actin staining, dHL60 cells are preincubated in suspension with PIK-93 or vehicle for 40 min, centrifuged for 5 min at 2000 rpm at room temperature in a J6-B centrifuge, resuspended in mHBSS containing the respective agent at the same concentration, allowed to stick to fibronectin-covered coverslips, and subjected to stimulation with a uniform concentration of 100 nM f-Met-Leu-Phe (fMLP) for 3 min. Cellsare fixed in 3.7% PFA and stained with 10 units/mL rhodamine-phalloidin for 15 min.

化学情報

分子量 389.88 化学式

C14H16ClN3O4S2

CAS No. 593960-11-3 SDF Download PIK-93 SDFをダウンロードする
Smiles CC1=C(SC(=N1)NC(=O)C)C2=CC(=C(C=C2)Cl)S(=O)(=O)NCCO
保管

In vitro
Batch:

DMSO : 78 mg/mL ( (200.06 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 1 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: PIK-93を買う | PIK-93 ic50 | PIK-93供給者 | PIK-93を購入する | PIK-93費用 | PIK-93生産者 | オーダーPIK-93 | PIK-93化学構造 | PIK-93分子量 | PIK-93代理店