BI-9564

BI-9564 is a selective inhibitor of BRD9 and BRD7 bromodomains with the IC50 of 75 nM and 3.4 µM, respectively.

BI-9564化学構造

CAS No. 1883429-22-8

サイズ 価格(税別) 在庫状況
JPY 18100 国内在庫あり
JPY 67900 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(1)

製品安全説明書

現在のバッチを見る: 純度: 99.67%
99.67

BI-9564関連製品

Epigenetic Reader Domain阻害剤の選択性比較

生物活性

製品説明 BI-9564 is a selective inhibitor of BRD9 and BRD7 bromodomains with the IC50 of 75 nM and 3.4 µM, respectively.
Targets
BRD9 [1]
(Cell-free assay)
BRD7 [1]
(Cell-free assay)
CECR2 [1]
(Cell-free assay)
5.9 nM(Kd) 73 nM(Kd) 77 nM(Kd)
In Vitro
In vitro Treatment of the panel with BI-9564 results in selective growth inhibition of a significant proportion of AML cell lines tested[1].
細胞実験 細胞株 MV-4-11 cells
濃度 various concentrations(10 nM-100 μM)
反応時間 2 h
実験の流れ To 750,000 MV-4-11 cells in 250 µl growth medium (in IMDM, 10 % FBS, GlutaMAX, 25 mM HEPES and 0,1% 2-Mercaptoethanol) per well compound is added at the desired concentration from a 10 mM stock solution using the HP D300 Digital Dispenser. After 2 hours of incubation with the compound, cells are collected by centrifugation, washed in ice cold PBS and lysed in 15 µl of cell extraction buffer. After 30 minutes on ice, nucleic acids are disrupted by sonication. cMYC levels are measured using the human c-Myc (Total) ELISA Kit.

化学情報

分子量 353.41 化学式

C20H23N3O3

CAS No. 1883429-22-8 SDF Download BI-9564 SDFをダウンロードする
Smiles CN1C=C(C2=C(C1=O)C=NC=C2)C3=C(C=C(C(=C3)OC)CN(C)C)OC
保管

In vitro
Batch:

Ethanol : 16 mg/mL

DMSO : 3 mg/mL ( (8.48 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: BI-9564を買う | BI-9564 ic50 | BI-9564供給者 | BI-9564を購入する | BI-9564費用 | BI-9564生産者 | オーダーBI-9564 | BI-9564化学構造 | BI-9564分子量 | BI-9564代理店