Iopromide

Iopromide is a low osmolar, non-ionic X-ray contrast agent for intravascular administration. It functions as a contrast agent by opacifying blood vessels in the path of flow of the contrast agent, permitting radiographic visualization of the internal structures until significant hemodilution occurs.

Iopromide化学構造

CAS No. 73334-07-3

サイズ 価格(税別) 在庫状況
JPY 17400 国内在庫あり
JPY 49000 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(1)

製品安全説明書

現在のバッチを見る: S320701 DMSO] 100 mg/mL] false] Water] 100 mg/mL] false] Ethanol] 100 mg/mL] false 純度: 99.99%
99.99

Iopromide関連製品

生物活性

製品説明 Iopromide is a low osmolar, non-ionic X-ray contrast agent for intravascular administration. It functions as a contrast agent by opacifying blood vessels in the path of flow of the contrast agent, permitting radiographic visualization of the internal structures until significant hemodilution occurs.
In Vitro
In vitro No toxic effects are detected at the highest tested concentration of Iopromide (10 g/L) in short-term toxicity tests with bacteria (Vibrio fisheri, Pseudomonas putida), algae (Scenedesmus subspicatus), crustaceans (Daphnia magna), and fish (Danio rerio, Leuciscus idus). Iopromide results in the ratio between the predicted environmental concentration (PEC) and the predicted no-effect concentration (PNEC) of 2 × 10-4 using an assessment factor of 100. [1] Iopromide results in the photocatalytic degradation values k of 0.18 and the coefficient of determination R2 of 0.997 in Milli-Q water with suspended TiO2. [2] The percent removal of Iopromide decreases from 97% to 86% when the activity of the nitrifying bacteria is inhibited. Iopromide results in metabolite of carboxylate formed during the oxidation of the primary alcohol on the side chain of iopromide when the nitrifying bacteria are inhibited. [3] Iopromide (0.1 mg/L to 0.27 mg/L) is removed more effectively in the nitrifying activate sludge which has a higher SRT (49 days) than in the conventional activated sludge (SRT of 6 days). Iopromide (0.1 mg/L to 0.27 mg/L) is removed more effectively in the nitrifying activate sludge which has a higher SRT (49 days) than in the conventional activated sludge (SRT of 6 days). The percent removal of Iopromide in the wastewater treatment plants reaches 61% in nitrifying activated sludge. [4] Iopromide-dosed plant at 0.1 mg/L, 1 mg/L and 100 mg/L results in the median of DOC-degradation of the synthetic sewage of 88.5%, 90.5%, 88.4% and 85.1%, respectively. Iopromide is eliminated to more than 80% in the 100 mg/L concentration after a lag period of 31 days. In the LSTP incubated with 1 mg/L Iopromide elimination reaches more than 80% after 38 days. Iopromide results in half-life of photodegradation of free amine of 4.21 hours. [5]
NCT Number Recruitment Conditions Sponsor/Collaborators Start Date Phases
NCT05778929 Not yet recruiting
Pancreatitis Chronic
Peking University People''s Hospital
April 1 2023 --
NCT05428397 Completed
Contrast Enhanced X-ray Based Examination
Bayer
June 30 2022 --
NCT03622801 Completed
Contrast Medium
Bayer
October 12 2018 --
NCT01580046 Unknown status
Kidney Failure Chronic
Yong Huo|Peking University First Hospital
April 2012 Phase 4

化学情報

分子量 791.11 化学式

C18H24I3N3O8

CAS No. 73334-07-3 SDF Download Iopromide SDFをダウンロードする
Smiles CN(CC(CO)O)C(=O)C1=C(C(=C(C(=C1I)C(=O)NCC(CO)O)I)NC(=O)COC)I
保管

In vitro
Batch:

DMSO : 100 mg/mL ( (126.4 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Water : 100 mg/mL

Ethanol : 100 mg/mL

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Iopromideを買う | Iopromide ic50 | Iopromide供給者 | Iopromideを購入する | Iopromide費用 | Iopromide生産者 | オーダーIopromide | Iopromide化学構造 | Iopromide分子量 | Iopromide代理店