MLN0905

MLN0905 is a potent inhibitor of PLK1 with IC50 of 2 nM.

MLN0905化学構造

CAS No. 1228960-69-7

サイズ 価格(税別) 在庫状況
JPY 26400 国内在庫あり
JPY 33500 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(2)

製品安全説明書

現在のバッチを見る: 純度: 99.9%
99.9

MLN0905関連製品

シグナル伝達経路

PLK阻害剤の選択性比較

生物活性

製品説明 MLN0905 is a potent inhibitor of PLK1 with IC50 of 2 nM.
Targets
PLK1 [1]
2 nM
In Vitro
In vitro MLN0905 is a potent inhibitor of PLK1 with IC50 of 2 nM. MLN0905 inhibits cell mitosis with EC50 of 9 nM. MLN0905 inhibits Cdc25C-T96 phosphorylation, a direct readout of PLK1 inhibition with EC50 of 29 nM. MLN0905 inhibits HT-29 viability with LD50 of 22 nM. MLN0905 possesses reasonable selectivity against a panel of 359 kinases. [1] MLN0905 inhibits a panel of lymphoma cells viability with IC50 of 3 – 24 nM. [2]
Kinase Assay PLK1 Flash Plate Assay
The human PLK1 enzymatic reaction totaling 30μL contained 50 mM Tris-HCl (pH 8.0), 10 mM MgCl2, 0.02% BSA, 10% glycerol, 1 mM DTT, 100 mM NaCl, 3.3% DMSO, 8 μM ATP, 0.2μCi [γ- 33 P]-ATP, 4μM peptide substrate (Biotin-AHX-LDETGHLDSSGLQEVHLA-CONH2), and 10 nM recombinant human PLK1[2–369]T210D. The enzymatic reaction mixture, with or without PLK inhibitors, is incubated for 2.5 h at 30℃before termination with 20μL of 150 mM EDTA. Then 25μL of the stopped enzyme reaction mixture is transferred to a 384-well streptavidin coated Image FlashPlate and incubated at room temperature for 3 h. The Image Flash Plate wells are washed three times with 0.02% Tween-20 and then read on the Perkin-Elmer Viewlux.
In Vivo
In Vivo Nude mice bearing HT-29 xenografts administered with MLN0905 (6.25 mg/Kg - 50 mg/Kg, p.o.) shows dose-dependent pharmacodynamic responses (48 hours after treatment). OCI LY-19-Luc tumor bearing mice administered with MLN0905 (3.12 mg/Kg – 6.25 mg/Kg, p.o.) shows significant pharmacodynamic responses amd peaks at 8 hours after treatment. [1] MLN0905 shows antitumor efficacy in treatment with OCI LY-19-Luc xenografts bearing scid mice for 21 days. The T/C of 6.25 mg/Kg daily group is 0.15. [2]

化学情報

分子量 486.56 化学式

C24H25F3N6S

CAS No. 1228960-69-7 SDF Download MLN0905 SDFをダウンロードする
Smiles CC1=C(C=C(C=N1)CCCN(C)C)NC2=NC=C3CC(=S)NC4=C(C3=N2)C=CC(=C4)C(F)(F)F
保管

In vitro
Batch:

DMSO : 97 mg/mL ( (199.35 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Water : Insoluble

Ethanol : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: MLN0905を買う | MLN0905 ic50 | MLN0905供給者 | MLN0905を購入する | MLN0905費用 | MLN0905生産者 | オーダーMLN0905 | MLN0905化学構造 | MLN0905分子量 | MLN0905代理店