BMS-378806

製品コードS2632 バッチS263202

印刷

化学情報

Chemical Structure Synonyms BMS 806 Storage
(From the date of receipt)		 3 years -20°C powder
1 years -80°C in solvent
化学式

C22H22N4O4
分子量 406.43 CAS No. 357263-13-9
Solubility (25°C)* 体外 DMSO 81 mg/mL (199.29 mM)
Ethanol 81 mg/mL (199.29 mM)
Water Insoluble
体内 （毎回新しく調製した物を用意してください）
Clear solution
30%PEG400 0.5%Tween80 5%propylene glycol
30.0mg/ml Taking the 1 mL working solution as an example, add 300 μL of 100 mg/ml clarified PEG400 stock solution to 5 μL of Tween80, mix evenly to clarify it; add 50 μL Propylene glycol to the above system, mix evenly to clarify it; then continue to add 645 μL ddH2O to adjust the volume. to 1 mL. The mixed solution should be used immediately for optimal results. 
* <1 mg/ml means slightly soluble or insoluble.
* Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations.

溶剤液（一定の濃度）を調合する

生物活性

製品説明 BMS-378806 (BMS 806) selectively inhibits the binding of HIV-1 gp120 to the CD4 receptor with EC50 of 0.85-26.5 nM in virus.
in vitro BMS-806, a 7-azaindole derivative, binds gp120 and interferes with the interaction of HIV surface protein gp120 with the host cell receptor CD4. BMS-806 inhibits a panel of macrophage- and T cell-tropic HIV-1 strains, which are laboratory strains that use either CCR5 (M-tropic) or CXR4 (T-tropic) co-receptors to enter cells and are classified as B subtypes. The aqueous solubility from the crystalline form of BMS-806 (BMS 378806) is 170 μg/mL. The solubility of BMS-806 is 1.3 mg/mL at pH=2.1 and 3.3 mg/mL at pH=11, a solubility profile that reveals the amphoteric nature of BMS-806 and estimates the pKa of the protonated form as 2.9 while that of the free base is approximately 9.6. BMS-806 competes with soluble CD4 binding to a monomeric form of gp120 in an ELISA assay with IC50 = ~ 100 nM. BMS-806 is specific towards HIV-1, with no significant inhibitory activity against HIV-2, SIV, MuLV, RSV, HCMV, BVDV, VSV, and influenza virus observed at concentrations ranging from 10 to 30 μM and no overt cytotoxicity toward host cells, CC50 values > 225 μM. [1] BMS-806 binds directly to gp120 at a stoichiometry of approximately 1:1, with a binding affinity similar to that of soluble CD4. The potential BMS-806 target site is localized to a specific region within the CD4 binding pocket of gp120 by using HIV-1 gp120 variants carrying either compound-selected resistant substitutions or gp120-CD4 contact site mutations. [2]
in vivo When BMS-806 is administered dose-proportional increases in the AUC and Cmax is observed. In rat, dog and monkey, plasma levels of drug exceeded the concentrations required to half-maximally inhibit virus replication in vitro. The volume of distribution of BMS-806 ranges from 0.4 to 0.6 L/kg, indicative of partitioning beyond plasma; however, examination of brain levels in the rat revealed minimal CNS penetration. [1] BMS-806 is stable in human, rat, dog and monkey blood at 37 °C during a 2-h incubation. The blood-to-plasma concentration ratios in humans, rats, dogs and monkeys are 1.1, 0.77, 1.2 and 0.92 (n=3), respectively, suggesting that BMS-806 is distributed to approximately the same extent between plasma and blood cells. The human clearance of BMS-806 predicted from microsomes is 9.2 ml/min/kg (46% of the hepatic blood flow). [3]

プロトコル(参考用のみ)

キナーゼアッセイ Drug susceptibility Assay
In general, host cells are infected with HIV-1 at a multiplicity of infection (MOI) of 0.005 50% tissue culture infective doses (TCID50)/cell followed by incubation in the presence of serially diluted inhibitors for 4 to 7 days. Virus yields are quantitated using an RT assay or a p24 enzyme-linked immunosorbent assay (ELISA) (NEN). The results from at least three experiments are used to calculate the 50% effective concentrations (EC50s). The EC50s of IDV, SQV, RTV, and NFV are compared to that of BMS-806 using Dunnett's test. These comparisons are made separately within each assay system. Dunnett's test is used to reduce the probability of false-positive results when a number of treatments are being compared to a control. Confidence bounds for the fold increases in EC50s observes when the same drug is tested in two different assay systems are computed using Fieller's theorem. The use of this theorem is necessary because ratios of parameters (in this case, EC50s) are known not to follow a standard probability distribution, such as the normal distribution. Numbers within the confidence interval are not significantly different from the observed fold increase at the 95% level.
細胞アッセイ 細胞株 MT-2 cells
濃度 0-3 mM
反応時間 6 days
実験の流れ To determine cytotoxicity, MT-2 cells are incubated in the presence of serially diluted BMS-806 for 6 days and cell viability is quantitated using an XTT [2,3-bis(2-methoxy-4-nitro-5-sulfophenyl-2H-tetrazolium-5-carboxanilide] assay to calculate the 50% cytotoxic concentrations (CC50s).
動物実験 動物モデル Rat, dog and monkey
投薬量 5 mg/kg, 3.4 mg/kg and 3.4 mg/kg.
投与方法 BMS-806 is intravenously administered.

Selleckの高級品が、幾つかの出版された研究調査結果（以下を含む）で使われた：

Asymmetric conformations of cleaved HIV-1 envelope glycoprotein trimers in styrene-maleic acid lipid nanoparticles [ Commun Biol, 2023, 6(1):535] PubMed: 37202420
Asymmetric Structures and Conformational Plasticity of the Uncleaved Full-Length Human Immunodeficiency Virus Envelope Glycoprotein Trimer [ J Virol, 2021, 95(24):e0052921] PubMed: 34549974
Long-Acting BMS-378806 Analogues Stabilize the State-1 Conformation of the Human Immunodeficiency Virus (HIV-1) Envelope Glycoproteins. [ J Virol, 2020, 10.1128/JVI.00148-20] PubMed: 32161177
HIV infection is influenced by dynamin at 3 independent points in the viral life cycle [ Traffic, 2017, 18(6):392-410] PubMed: 28321960
CD4-induced activation in a soluble HIV-1 Env trimer [ Structure, 2014, 22(7):974-84] PubMed: 24931470

長期の保管のために-20°Cの下で製品を保ってください。

人間や獣医の診断であるか治療的な使用のためにでない。

各々の製品のための特定の保管と取扱い情報は、製品データシートの上で示されます。大部分のSelleck製品は、推薦された状況の下で安定です。製品は、推薦された保管温度と異なる温度で、時々出荷されます。長期の保管のために必要とされてそれと異なる温度で、多くの製品は、短期もので安定です。品質を維持するが、夜通しの積荷のために最も経済的な貯蔵状況を用いてあなたの送料を保存する状況の下に、製品が出荷されることを、我々は確実とします。製品の受領と同時に、製品データシートの上で貯蔵推薦に従ってください。