Motixafortide (BL-8040)

製品コードS9665 バッチS966503

印刷

化学情報

 Chemical Structure Synonyms BKT140, TF 14016, 4-fluorobenzoyl, 4F-benzoyl-TN14003, T140 Storage
(From the date of receipt)
3 years -20°C powder
化学式

C97H144FN33O19S2

分子量 2159.52 CAS No. 664334-36-5
Solubility (25°C)* 体外 DMSO 100 mg/mL (46.3 mM)
Water 100 mg/mL (46.3 mM)
Ethanol 100 mg/mL (46.3 mM)
体内 (毎回新しく調製した物を用意してください)
Homogeneous suspension
CMC-NA
≥5mg/ml Taking the 1 mL working solution as an example, add 5 mg of this product to 1 ml of CMC-Na solution, mix evenly to obtain a homogeneous suspension with a final concentration of 5 mg/ml.
Clear solution
5%DMSO 40%PEG300 5%Tween80 50%ddH2O

この製剤はselleckのラボで検証済みです。上記の溶解方法がご要望を満たさない場合、selleckの営業担当までお問い合わせ頂ければ、個別の試験を行います。

5.000mg/ml (2.32mM) Taking the 1 mL working solution as an example, add 50 μL of 100 mg/ml clarified DMSO stock solution to 400 μL of PEG300, mix evenly to clarify it; add 50 μL of Tween80 to the above system, mix evenly to clarify; then continue to add 500 μL of ddH2O to adjust the volume to 1 mL. The mixed solution should be used immediately for optimal results. 
Clear solution
5% DMSO 95% Corn oil

この製剤はselleckのラボで検証済みです。上記の溶解方法がご要望を満たさない場合、selleckの営業担当までお問い合わせ頂ければ、個別の試験を行います。

0.625mg/ml (0.29mM) Taking the 1 mL working solution as an example, add 50 μL of 12.5 mg/ml clear DMSO stock solution to 950 μL of corn oil and mix evenly. The mixed solution should be used immediately for optimal results. 
* <1 mg/ml means slightly soluble or insoluble.
* Please note that Selleck tests the solubility of all compounds in-house, and the actual solubility may differ slightly from published values. This is normal and is due to slight batch-to-batch variations.

溶剤液(一定の濃度)を調合する

生物活性

製品説明 Motixafortide (BL-8040, BKT140, TF 14016, 4-fluorobenzoyl, 4F-benzoyl-TN14003, T140) is an antagonist of CXCR4 with IC50 of ~1 nM. BL-8040 induces the apoptosis of AML blasts by down-regulating ERK, BCL-2, MCL-1 and cyclin-D1 via altered miR-15a/16-1 expression.
in vitro

Treatment with Motixafortide (BL-8040) induces the robust mobilization of AML blasts from the BM. In addition, AML cells exposed to this compound undergo differentiation. It also induces the apoptosis of AML cells in vitro. This apoptosis is mediated by the up-regulation of miR-15a/miR-16-1, resulting in down-regulation of the target genes BCL-2, MCL-1 and cyclin-D1. Overexpression of miR-15a/miR-16-1 directly induces leukemic cell death. BL-8040-induced apoptosis is also mediated by the inhibition of survival signals via the AKT/ERK pathways.[1]

in vivo

Motixafortide (BL-8040) induces the apoptosis of AML cells in vivo. Treatment with a BCL-2 inhibitor induces apoptosis and acts together with it to enhance cell death. This compound also synergizes with FLT3 inhibitors to induce AML cell death. Importantly, this combined treatment prolongs the survival of tumor-bearing mice and reduces minimal residual disease in vivo.[1]

プロトコル(参考用のみ)

細胞アッセイ 細胞株 The leukemic cell lines (MV4-11, THP-1, U937, HL-60)
濃度 0.1 μM, 1 μM, 10 μM, 20 μM
反応時間 24 h, 48 h
実験の流れ

Cells are seeded in triplicate at 2×105 cells/well in a total volume of 250 μl in a 96-well plate in medium supplemented with 1% FCS RPMI medium for 24hr in the presence of Motixafortide (BL-8040)/AMD3100 (0.1, 1, 10 or 20μM) or ABT-199 (0.01, 0.1, 1 or 10μM). To test the combination of this compound and ABT-199, cells are incubated for 24hr with it (20μM) and ABT-199 (0.01, 0.1, 1 or 10μM). To test the combined effects of the compound and AC220, cells are incubated for 48 hr with it (20μM), AC220 (50nM) or a combination of the two. After incubation, cells are stained with propidium iodide (PI), and the percentage of dead cells (PI+ cells) in the culture is measured using a FACSCalibur machine.

動物実験 動物モデル female NOD scid gamma (NSG) mice (7-9 weeks old)
投薬量 400 μg/mouse
投与方法 SC

参考

  • https://pubmed.ncbi.nlm.nih.gov/28280274/

Selleckの高級品が、幾つかの出版された研究調査結果(以下を含む)で使われた:

Modelling glioblastoma migration with patient-derived cells, human iPSC-derived cortical neural spheroid, and high-content imaging [ King's College London, 2023, ] PubMed: None

長期の保管のために-20°Cの下で製品を保ってください。

人間や獣医の診断であるか治療的な使用のためにでない。

各々の製品のための特定の保管と取扱い情報は、製品データシートの上で示されます。大部分のSelleck製品は、推薦された状況の下で安定です。製品は、推薦された保管温度と異なる温度で、時々出荷されます。長期の保管のために必要とされてそれと異なる温度で、多くの製品は、短期もので安定です。品質を維持するが、夜通しの積荷のために最も経済的な貯蔵状況を用いてあなたの送料を保存する状況の下に、製品が出荷されることを、我々は確実とします。製品の受領と同時に、製品データシートの上で貯蔵推薦に従ってください。