BX-912

BX912 is a potent and specific PDK1 inhibitor with IC50 of 12 nM, 9- and 105- fold greater selectivity for PDK1 than PKA and PKC in cell-free assays, respectively. In comparison to GSK3β, selectivity for PDK1 is 600-fold.

CAS No. 702674-56-4

サイズ	価格(税別)	在庫状況
2mg	JPY 16900	国内在庫あり
5mg	JPY 30200	国内在庫あり

代表番号: 045-509-1970\|電子メール：[email protected] よく尋ねられる質問

文献中Selleckの製品使用例（14）

カスタマーフィードバック2个实验数据

製品安全説明書

現在のバッチを見る： S127501 DMSO] 94 mg/mL] false] Ethanol] 94 mg/mL] false] Water] Insoluble] false 純度： 99.8%

99.8

BX-912関連製品

関連ターゲット	PDK1 PDK2 PDK3	もっと見る
関連製品	JX06	もっと見る
関連化合物ライブラリー	Kinase Inhibitor Library PI3K/Akt Inhibitor Library Apoptosis Compound Library Cell Cycle compound library NF-κB Signaling Compound Library	もっと見る

シグナル伝達経路

PDKシグナル伝達経路

PDK阻害剤の選択性比較

生物活性

製品説明

BX912 is a potent and specific PDK1 inhibitor with IC50 of 12 nM, 9- and 105- fold greater selectivity for PDK1 than PKA and PKC in cell-free assays, respectively. In comparison to GSK3β, selectivity for PDK1 is 600-fold.

Targets

PDK-1 ^[1] (Cell-free assay)	PKA ^[1] (Cell-free assay)	KDR ^[1] (Cell-free assay)	CDK2/CyclinE ^[1] (Cell-free assay)	Chk1 ^[1] (Cell-free assay)	もっとクリックする
12 nM	110 nM	410 nM	650 nM	830 nM	もっとクリックする

In Vitro
In vitro	BX912 prevents ChcK1, PKA, c-kit, and KDR with IC50 of 0.83, 0.11, 0.85, and 0.41 μM, resepectively. BX912 blocks PDK1/Akt signaling in tumor cells and suppresses the anchorage-dependent growth of a variety of tumor cell lines (such as PC-3 cells ) in culture or induces apoptosis. A number of cancer cell lines (such as MDA-468 breast cancer) with elevated Akt activity are >30-fold more sensitive to growth inhibition by PDK1 inhibitor BX912 in soft agar than on tissue culture plastic, consistent with the cell survival function of the PDK1/Akt signaling pathway, which is particularly important for unattached cells. BX912 potently blocks PDK1 enzyme activity in a direct kinase assay format, although BX912 fails to block preactivated AKT2 activity (IC50 > 10 μM). Therefore, BX-912 is a direct inhibitor of PDK1. BX912 is a competitive inhibitor of PDK1 activity with respect to its substrate, ATP, suggesting that BX912 binds to the ATP binding pocket of PDK1. The aminopyrimidine backbone of BX912 adopts a similar orientation in the active site of PDK1. BX912 promotes a pronounced increase in the population of MDA-468 cells with 4 N DNA content, indicative of a block at the G2/M phase of the cell cycle. BX912 also potently inhibits the growth of HCT-116 cells in soft agar, showing a 96% inhibitory effect at a dose of 1 μM. BX912 potently inhibits the growth of PC-3 cells in soft agar, displaying IC50 of 0.32 μM. ^[1]
Kinase Assay	Kinase assays
Kinase Assay	PDK1 is assayed in a direct kinase assay and a coupled assay format measuring PDK1- and PtdIns-3,4-P2-mediated activation of AKT2. For the coupled assay, the final assay mixture (60 μL) contained: 15 mM MOPS, pH 7.2, 1 mg/mL bovine serum albumin, 18 mM β-glycerol phosphate, 0.7 mM dithiothreitol, 3 mM EGTA, 10 mM MgOAc, 7.5 μM ATP, 0.2 μCi of [γ- ³³P]ATP, 7.5 μM biotinylated peptide substrate (biotin-ARRRDGGGAQPFRPRAATF), 0.5 μL of PtdIns-3,4-P2-containing phospholipid vesicles, 60 pg of purified recombinant human PDK1, and 172 ng of purified recombinant human AKT2. After incubation for 2 hours at room temperature, the biotin-labeled peptide is captured from 10 μL of the assay mixture on streptavidin-coated SPA beads, and product formation is measured by scintillation proximity in a Wallac MicroBeta counter. The product formed is proportional to the time of incubation and to the amount of PDK1 and inactive AKT2 added. PDK1 is added at suboptimal levels so that the assay could sensitively detect inhibitors of AKT2 activation as well as direct inhibitor BX912 of PDK1 or AKT2. To measure PDK1 activity directly, the final assay mixture (60 μL) contained 50 mM Tris-HCl, pH 7.5, 0.1 mM EGTA, 0.1 mM EDTA, 0.1% β-mercaptoethanol, 1 mg/mL bovine serum albumin, 10 mM MgOAc, 10 μM ATP, 0.2 μCi of [γ-³³P]ATP, 7.5 μM substrate peptide (H2N-ARRRGVTTKTFCGT), and 60 ng of purified recombinant human PDK1. After 4 hours at room temperature, 25 mM EDTA is added and a portion of the reaction mixture on P81 phosphocellulose paper is spotted. The filter paper is washed three times with 0.75% phosphoric acid and once with acetone. After drying, the filter-bound labeled peptide is quantified using a phosphorimager.
細胞実験	細胞株	MDA-468, MDA-453
	濃度	0.001-1 μM
	反応時間	72 hours
	実験の流れ	Cells such as MDA-468, MDA-453 are seeded at a low density (1.5-3 × 10³ cells/well, 0.1 mL/well, 96-well plates) and are incubated overnight. BX912 treatments are made by adding 10 μL/well of the compound in 1% dimethyl sulfoxide and growth medium (final concentration of dimethyl sulfoxide, 0.1%), followed by brief shaking. Treated cells are incubated for 72 hours, and viability is measured by the addition of 10 μL of the metabolic dye WST-1. The WST-1 signal is read in a plate reader at 450 nm, and a no cell, or zero time cell, background is subtracted to calculate the net signal.

参考
[1] Feldman RI, et al. J Biol Chem. 2005, 280(20), 19867-19874.

参考

[1] Feldman RI, et al. J Biol Chem. 2005, 280(20), 19867-19874.

化学情報

分子量	471.35	化学式	C₂₀H₂₃BrN₈O
CAS No.	702674-56-4	SDF	Download BX-912 SDFをダウンロードする
Smiles	C1CCN(C1)C(=O)NC2=CC=CC(=C2)NC3=NC=C(C(=N3)NCCC4=CN=CN4)Br
保管	3年-20°C粉	溶液の保管冷凍と解凍の繰り返しを避けるため小分けにしてください	1年-80°Cin solvent
保管	3年-20°C粉	溶液の保管冷凍と解凍の繰り返しを避けるため小分けにしてください	1个月-20°Cin solvent

In vitro
Batch:

DMSO : 94 mg/mL ( (199.42 mM)；吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 94 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量	濃度	体積	分子量
=	×	×

希釈計算器分子量計算器

投与溶液組成計算機(クリア溶液)

ステップ１：実験データを入力してください。（実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します）

投与量 mg/kg 動物平均体重 g 投与体積（動物毎）μL 動物数匹

ステップ２：投与溶媒の組成を入力してください。（ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください）

% DMSO + % + % Tween 80 + % ddH₂O

%DMSO+ %

計算結果：

投与溶媒濃度： mg/ml;

DMSOストック溶液調製方法： mg 試薬を μL DMSOに溶解する（濃度 mg/mL, 注：濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法：Take μL DMSOストック溶液に μL PEG300，を加え、完全溶解後μL Tween 80，を加えて完全溶解させた後 μL ddH₂O，を加え完全に溶解させます。

投与溶媒調製方法：μL DMSOストック溶液に μL Corn oil，を加え、完全溶解。

注意：１.ストック溶液に沈殿、混濁などがないことをご確認ください；
２.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

C1=C0/X	C1:	LOG(C1):
C2=C1/X	C2:	LOG(C2):
C3=C2/X	C3:	LOG(C3):
C4=C3/X	C4:	LOG(C4):
C5=C4/X	C5:	LOG(C5):
C6=C5/X	C6:	LOG(C6):
C7=C6/X	C7:	LOG(C7):
C8=C7/X	C8:	LOG(C8):