RGD (Arg-Gly-Asp) Peptides

RGD (Arg-Gly-Asp) Peptides is a cell adhesion motif which can mimic cell adhesion proteins and bind to integrins.

RGD (Arg-Gly-Asp) Peptides化学構造

CAS No. 99896-85-2

サイズ 価格(税別) 在庫状況
10mM (1mL in DMSO) JPY 29000 国内在庫あり
JPY 26400 国内在庫あり
JPY 450200 国内在庫なし(納期7~10日)

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(23)

カスタマーフィードバック3个实验数据

製品安全説明書

現在のバッチを見る: 純度: 99%
99

RGD (Arg-Gly-Asp) Peptides関連製品

シグナル伝達経路

Integrin阻害剤の選択性比較

生物活性

製品説明 RGD (Arg-Gly-Asp) Peptides is a cell adhesion motif which can mimic cell adhesion proteins and bind to integrins.
Targets
Integrin [1]
In Vitro
In vitro The RGD sequence is the cell attachment site of a large number of adhesive extracellular matrix, blood, and cell surface proteins, and nearly half of the over 20 known integrins recognize this sequence in their adhesion protein ligands. The RGD peptides and mimics can be used to probe integrin functions in various biological systems. Drug design based on the RGD structure may provide new treatments for diseases such as thrombosis, osteoporosis, and cancer. [1] RGD peptide acts as an inhibitor of integrin-ligand interactions and can induce apoptosis in the absence of signals and integrin-mediated cell clustering. Research demonstrates that RGD peptides promote apoptosis through activation of conformation changes that enhance pro-caspase-3 activation and autoprocessing. [2] The RGD peptide can serve as a cell adhesion site of extracellular matrix, cell surface proteins, and integrins. [3] In addition, RGD peptide can inhibit ACK-2 activation through cell adhesion. [4]
細胞実験 細胞株 HLE cell line
濃度 0.1, 0.3, 1.0 and 2.0 mg/ml
反応時間 90 min
実験の流れ

The cells were seeded at approximately 2.6 × 104 /well on each ECM-coated 24-well plate in the medium containing the monotype of GRGDSP RGD peptide at 0 (control), 0.1, 0.3, 1.0 and 2.0 mg/ml. After 90 min of incubation, the floating cells were removed by washing twice with Ca 2+ -Mg 2+ -free phosphate-buffered saline. Then the attached cells were dissociated with trypsin-EDTA solution. The number of cells attached at each concentration of peptide was counted using a hemocytometer. 

化学情報

分子量 346.34 化学式

C12H22N6O6

CAS No. 99896-85-2 SDF Download RGD (Arg-Gly-Asp) Peptides SDFをダウンロードする
Smiles C(CC(C(=O)NCC(=O)NC(CC(=O)O)C(=O)O)N)CN=C(N)N
保管

In vitro
Batch:

Water : 69 mg/mL

DMSO : 7 mg/mL ( (20.21 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: RGD (Arg-Gly-Asp) Peptidesを買う | RGD (Arg-Gly-Asp) Peptides ic50 | RGD (Arg-Gly-Asp) Peptides供給者 | RGD (Arg-Gly-Asp) Peptidesを購入する | RGD (Arg-Gly-Asp) Peptides費用 | RGD (Arg-Gly-Asp) Peptides生産者 | オーダーRGD (Arg-Gly-Asp) Peptides | RGD (Arg-Gly-Asp) Peptides化学構造 | RGD (Arg-Gly-Asp) Peptides分子量 | RGD (Arg-Gly-Asp) Peptides代理店