Triamterene

別名:SKF8542

Triamterene (SKF8542) blocks epithelial Na+ channel (ENaC) in a voltage-dependent manner with IC50 of 4.5 μM.

Triamterene化学構造

CAS No. 396-01-0

サイズ 価格(税別) 在庫状況
JPY 18100 国内在庫あり
JPY 101400 国内在庫なし(納期7~10日)

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(2)

製品安全説明書

現在のバッチを見る: 純度: 99.91%
99.91

Triamterene関連製品

Sodium Channel阻害剤の選択性比較

生物活性

製品説明 Triamterene (SKF8542) blocks epithelial Na+ channel (ENaC) in a voltage-dependent manner with IC50 of 4.5 μM.
Targets
ENaC [1] ENaCαS583 [1]
4.5 μM 23.9 μM
In Vitro
In vitro Triamterene inhibits the epithelial sodium channels on principal cells in the late distal convoluted tubule and collecting tubule, which are responsible for 1-2% of total sodium reabsorption. Triamterene can achieve a modest amount of diuresis by decreasing the osmotic gradient necessary for water reabsorption from lumen to interstitium. Triamterene also has a potassium-sparing effect. Normally, the process of potassium excretion is driven by the electrochemical gradient produced by sodium reabsorption. As sodium is reabsorbed, it leaves a negative potential in the lumen, while producing a positive potential in the principal cell. This potential promotes potassium excretion through apical potassium channels. By inhibiting sodium reabsorption, triamterene also inhibits potassium excretion. [2]
In Vivo
In Vivo 4'-hydroxylation of triamterene in humans appears to be mediated exclusively by CYP1A2. Inhibition or induction of CYP1A2 will change the time course of both triamterene and its active phase-II metabolite.[3]

化学情報

分子量 253.26 化学式

C12H11N7

CAS No. 396-01-0 SDF Download Triamterene SDFをダウンロードする
Smiles C1=CC=C(C=C1)C2=NC3=C(N=C(N=C3N=C2N)N)N
保管

In vitro
Batch:

DMSO : 5 mg/mL ( (19.74 mM); Warmed with 50℃ water bath; 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Water : Insoluble

Ethanol : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Triamtereneを買う | Triamterene ic50 | Triamterene供給者 | Triamtereneを購入する | Triamterene費用 | Triamterene生産者 | オーダーTriamterene | Triamterene化学構造 | Triamterene分子量 | Triamterene代理店