Spebrutinib (AVL-292)

別名:CC-292

Spebrutinib (AVL-292) is a covalent, orally active, and highly selective BTK inhibitor with IC50 of <0.5 nM, displaying at least 1400-fold selectivity over the other kinases assayed. Phase 1.

Spebrutinib (AVL-292)化学構造

CAS No. 1202757-89-8

サイズ 価格(税別) 在庫状況
JPY 44500 国内在庫あり
JPY 130500 国内在庫あり
JPY 598500 国内在庫なし(納期7~10日)

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(11)

カスタマーフィードバック2个实验数据

製品安全説明書

現在のバッチを見る: 純度: 99.99%
99.99

Spebrutinib (AVL-292)関連製品

シグナル伝達経路

BTK阻害剤の選択性比較

生物活性

製品説明 Spebrutinib (AVL-292) is a covalent, orally active, and highly selective BTK inhibitor with IC50 of <0.5 nM, displaying at least 1400-fold selectivity over the other kinases assayed. Phase 1.
特性 Orally bioavailable BTK-selective inhibitor that has been tested in Phase I clinical trials for treatment of relapsed or refractory B-NHL, CLL and WM.
Targets
BTK [1]
(Cell-free assay)
<0.5 nM
In Vitro
In vitro AVL-292 exhibits dose-dependent inhibition of Btk with EC50 of 8 nM and downstream BCR signaling components in Ramos cells. [1] AVL-292, by inhibiting BTK activities, further inhibits B cell proliferation with EC50 of 3 nM. [2]
Kinase Assay Procedures for BTK OMNIA Assay
The Omnia continuous read assay is performed essentially as described by the vendor. The assay conditions are: 40 μM ATP (1X KMATP), 10 μM Y5-Sox, and 10 nM BTK enzyme. Briefly, a substrate mix containing 1.13X ATP and the Y5 Sox substrate is first prepared in 1X Omnia Kinase Reaction Buffer (KRB) consisting of 20 mM Tris, pH 7.5, 5 mM MgCl2, 1 mM EGTA, 5 mMβ-glycerophosphate, 5% glycerol, and 0.2 mM DTT. For IC50 measurements, 5 μL of enzyme are incubated with serially diluted (3-fold) compounds prepared in 50% DMSO in a Corning (#3574) 384-well, white, non-binding surface microtiter plate at 25°C for 30 min. Kinase reactions are started with the addition of 45 μL of the ATP/Y5 substrate mix and monitored at λex360/λem485 in a Synergy 4 plate reader for 60 minutes. Progress curves from each well are examined for linear reaction kinetics and fit statistics. Initial velocity from each reaction is determined from the slope of a plot of relative fluorescence units versus time and then plotted against inhibitor concentration to estimate IC50 using the Response, Variable Slope model in GraphPad Prism from GraphPad Software.
細胞実験 細胞株 Human B cells
濃度 ~1000 nM
反応時間 72 hours
実験の流れ A suspension of resting purified naïve human B cells isolated by negative selection in RPMI is prepared at 0.4–0.5 × 106 cells/ml. Cells are mixed together with α-human IgM (final concentration of 5 μg/ml in each well) and vehicle (dimethyl sulfoxide) or AVL-292 (final concentrations of 0.01, 0.1, 1.0, 10.0, 100.0, or 1000 nM per well) and seeded in a 96-well plate. Cells are incubated for 56 hours in a humidified incubator maintained at 37°C and 5% CO2. 3H-Thymidine is added (final concentration of 1 μCi in each well) and cells are incubated overnight, harvested, and measured for 3H incorporation. Experiments are performed in triplicate.
In Vivo
In Vivo In a collagen-induced arthritis mouse model, AVL-292 (3- 30 mg/kg, p.o.) dose-dependently inhibits the clinical signs of inflammatory disease, including reduction in joint and paw swelling and visible redness of the affected paws. [2]
NCT Number Recruitment Conditions Sponsor/Collaborators Start Date Phases
NCT02031419 Active not recruiting
Lymphoma Large B-Cell Diffuse
Celgene
December 18 2013 Phase 1
NCT01766583 Completed
Relapsed/Refractory B-cell Lymphoma
The Lymphoma Academic Research Organisation|Celgene Corporation
February 2013 Phase 1
NCT01351935 Completed
B Cell Non-Hodgkin''s Lymphoma|Chronic Lymphocytic Leukemia|Waldenstrom Macroglobulinemia
Celgene|The Leukemia and Lymphoma Society
July 18 2011 Phase 1

化学情報

分子量 423.44 化学式

C22H22FN5O3

CAS No. 1202757-89-8 SDF Download Spebrutinib (AVL-292) SDFをダウンロードする
Smiles COCCOC1=CC=C(C=C1)NC2=NC=C(C(=N2)NC3=CC(=CC=C3)NC(=O)C=C)F
保管

In vitro
Batch:

DMSO : 85 mg/mL ( (200.73 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Water : Insoluble

Ethanol : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Spebrutinib (AVL-292)を買う | Spebrutinib (AVL-292) ic50 | Spebrutinib (AVL-292)供給者 | Spebrutinib (AVL-292)を購入する | Spebrutinib (AVL-292)費用 | Spebrutinib (AVL-292)生産者 | オーダーSpebrutinib (AVL-292) | Spebrutinib (AVL-292)化学構造 | Spebrutinib (AVL-292)分子量 | Spebrutinib (AVL-292)代理店