ホームページ Angiogenesis Bcr-Abl inhibitor Rebastinib (DCC-2036) For research use only.

Rebastinib (DCC-2036)

Rebastinib (DCC-2036) is a conformational control Bcr-Abl inhibitor for Abl1(WT) and Abl1(T315I) with IC50 of 0.8 nM and 4 nM, also inhibits SRC, LYN, FGR, HCK, KDR, FLT3, and Tie-2, and low activity to seen towards c-Kit. Phase 1.

Rebastinib (DCC-2036)化学構造

CAS No. 1020172-07-9

サイズ 価格(税別) 在庫状況
JPY 48000 国内在庫あり
JPY 145500 国内在庫あり
JPY 748500 国内在庫なし(納期7~10日)

代表番号: 045-509-1970|電子メール：[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例（11）

カスタマーフィードバック3个实验数据

製品安全説明書

現在のバッチを見る： S263401 DMSO] 111 mg/mL] false] Ethanol] 18 mg/mL] false] Water] Insoluble] false 純度： 99.94%
99.94

Rebastinib (DCC-2036)関連製品

シグナル伝達経路

Bcr-Abl Signaling Pathways

Bcr-Ablシグナル伝達経路

Bcr-Abl阻害剤の選択性比較

生物活性

製品説明 Rebastinib (DCC-2036) is a conformational control Bcr-Abl inhibitor for Abl1(WT) and Abl1(T315I) with IC50 of 0.8 nM and 4 nM, also inhibits SRC, LYN, FGR, HCK, KDR, FLT3, and Tie-2, and low activity to seen towards c-Kit. Phase 1.
特性 A conformational control inhibitor of Abl1 and T315I Abl1.
Targets
u-Abl1 (native) [1]
(Cell-free assay)		 Abl1 (H396P) [1]
(Cell-free assay)		 p-Abl1 (native) [1]
(Cell-free assay)		 FLT3 [1]
(Cell-free assay)		 p-Abl1 (T315I) [1]
(Cell-free assay)		 もっとクリックする
0.75 nM 1.4 nM 2 nM 2 nM 4 nM
In Vitro
In vitro DCC-2036 shows the potent inhibitory activities against purified native Abl1 in unphosphorylated (u-Abl1native) and phosphorylated (p-Abl1native) forms, unphosphorylated and phosphorylated gatekeeper mutant Abl1T315I, and the activation loop mutant Abl1H396P in a non-ATP-competitive manner with IC50 of 0.8 nM, 2 nM, 1.4 nM, 5 nM, and 4 nM, respectively. Moreover, DCC-2036 also inhibits the Src family kinases Src, LYN, FGR, and HCK, and the receptor TKs KDR, FLT3, and TIE2 with IC50 of 34 nM, 29 nM, 38 nM, 40 nM, 4 nM, 2 nM and 6 nM, respectively. [1] DCC-2036 shows the anti-proliferative activities against Ba/F3 cells expressing native or mutant Bcr-Abl1 with IC50 ranging from 2 nM to 150 nM. In addition, DCC-2036 also inhibits proliferation of the Ph+ cell line K562 (IC50 5.5 nM), and induces apoptosis in both Bcr-Abl1-expressing Ba/F3 and K562 cells potently. [1] A recent study shows that DCC-2036 shows the selectivity for growth inhibition of Bcr-Abl-positive cells by its marked inhibition of CML cell lines compared to non-CML leukemia lines. [2]
Kinase Assay Assay of Abl1 kinase isoforms and determination of inhibitor potency
Activity of u-Abl1native is determined by following the production of ADP from the kinase reaction through coupling with the pyruvate kinase/lactate dehydrogenase system. In this assay, the oxidation of NADH (measured as a decreased A340nm) is continuously monitored spectrophotometrically. The final reaction mixture (100 μL, in a 384-well Corning plate) is prepared as follows: An Abl1 kinase/coupled assay components mixture is prepared containing u-Abl1 kinase (1 nM), Abltide (EAIYAAPFAKKK, 0.2 mM), MgCl2 (9 mM), pyruvate kinase (~ 4 units), lactate dehydrogenase (~ 0.7 units), phosphoenol pyruvate (1 mM), and NADH (0.28 mM) in 90 mM Tris containing 0.1 % octyl-glucoside and 1 % DMSO, pH 7.5. Separately, an inhibitor mixture is prepared containing DCC-2036 serially diluted 3-fold in DMSO followed by dilution into buffer composed of 180 mM Tris, pH 7.5, containing MgCl2 (18 mM) and 0.2 % octyl-glucoside. Fifty μL of the inhibitor mixture is mixed with 50 μL of the above Abl1 kinase/coupled assay components mixture, which is then incubated at 30 °C for 2 hours before 2 μL of 25 mM ATP (500 μM, final) is added to start the reaction. The reaction is recorded every 2 minutes for 2.5 hours at 30 °C on a Polarstar Optima or Synergy2 plate reader. Reaction rate (slope) is calculated using the 1 to 2 hour time frame with reader's software. Percent inhibition is obtained by comparison of reaction rate with that of a DMSO control. IC50 values are calculated from a series of percent inhibition values determined at a range of inhibitor concentrations using GraphPad Prism. The kinase assay for Abl1T315I, p-Abl1native or Abl1H396P is assayed the same as above except that 2.2 nM Abl1T315I, 1 nM p-Abl1 native or 1.3 nM Abl1H396P is used. The above assay format is also used for kinases other than Abl1 with the exception of TIE2, for which a fluorescence polarization/Transcreener format is used. The assay conditions are the same as described above except that PolyE4Y (final 1 mg/mL) is used as the substrate and one hour preincubation is used.
細胞実験 細胞株 Ba/F3 cells and primary Ph+ leukemia cells
濃度 0-10 μM
反応時間 72 hours
実験の流れ Ba/F3 cells or primary Ph+ leukemia cells are plated in triplicate in 96-well plates containing test compounds. After 72 hours, viable cells are quantified by Resazurin or MTT assay. Cells are diluted in medium to be added to each well of a 96-well tissue culture-treated plate. All cells are incubated overnight and maintained in a humidified atmosphere at 37 °C and 5% CO2. Cells are treated the following day. Serum-free medium is used during treatment with DCC-2036. MTT is used to assess the viability of cells following treatment. Aliquots of 20 mL of stock MTT solution are added to each well containing 200 mL of medium (10% final solution) and incubated with the cells for 2 hours. Following incubation the medium is removed and 200 mL of dimethylsulfoxide added to solubilize the formazan crystals. The absorbance is read on the plate reader at 550 and 690 nm. A subtraction analysis of the dual wavelength is performed (D550 to D690) to increase accuracy of the measuremen
In Vivo
In Vivo In a mouse allograft model bearing Ba/F3-Bcr-Abl1T315I leukemia cells, DCC-2036 treatment by oral gavage at 100 mg/kg once daily effectively inhibits Bcr-Abl1 signaling and significantly prolongs mouse survival. [1]
動物実験 動物モデル Ba/F3 cells transformed to interleukin-3 independence by transduction with either Bcr-Abl1native or Bcr-Abl1T315I retrovirus are injected intravenously into syngeneic Balb/c mice.
投与量 ≤100 mg/kg
投与経路 Administered via p.o.
NCT Number Recruitment Conditions Sponsor/Collaborators Start Date Phases
NCT03717415 Unknown status
Locally Advanced or Metastatic Solid Tumor
Deciphera Pharmaceuticals LLC
 January 2 2019 Phase 1|Phase 2
NCT03601897 Completed
Locally Advanced or Metastatic Solid Tumor
Deciphera Pharmaceuticals LLC
 October 25 2018 Phase 1|Phase 2

化学情報

分子量 553.59 化学式

C30H28FN7O3
CAS No. 1020172-07-9 SDF Download Rebastinib (DCC-2036) SDFをダウンロードする
Smiles CC(C)(C)C1=NN(C(=C1)NC(=O)NC2=C(C=C(C=C2)OC3=CC(=NC=C3)C(=O)NC)F)C4=CC5=C(C=C4)N=CC=C5
保管

In vitro
Batch:

DMSO : 111 mg/mL ( (200.5 mM)； 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 18 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ１：実験データを入力してください。（実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します）

mg/kg g μL 匹

ステップ２：投与溶媒の組成を入力してください。（ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください）

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果：

投与溶媒濃度： mg/ml;

DMSOストック溶液調製方法： mg 試薬を μL DMSOに溶解する（濃度 mg/mL, 注：濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法：Take μL DMSOストック溶液に μL PEG300，を加え、完全溶解後μL Tween 80，を加えて完全溶解させた後 μL ddH2O，を加え完全に溶解させます。

投与溶媒調製方法：μL DMSOストック溶液に μL Corn oil，を加え、完全溶解。

注意：１.ストック溶液に沈殿、混濁などがないことをご確認ください；
２.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Rebastinib (DCC-2036)を買う | Rebastinib (DCC-2036) ic50 | Rebastinib (DCC-2036)供給者 | Rebastinib (DCC-2036)を購入する | Rebastinib (DCC-2036)費用 | Rebastinib (DCC-2036)生産者 | オーダーRebastinib (DCC-2036) | Rebastinib (DCC-2036)化学構造 | Rebastinib (DCC-2036)分子量 | Rebastinib (DCC-2036)代理店