Seletalisib (UCB-5857)

Seletalisib (UCB-5857) is a novel small-molecule inhibitor of PI3Kδ with an IC50 value of 12 nM and shows significant selectivity to PI3Kδ with respect to the other class I PI3K isoforms (between 24- and 303-fold).

Seletalisib (UCB-5857)化学構造

CAS No. 1362850-20-1

サイズ 価格(税別) 在庫状況
JPY 23100 国内在庫あり
JPY 43700 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(1)

製品安全説明書

現在のバッチを見る: S856001 DMSO] 97 mg/mL] false] Ethanol] 97 mg/mL] false] Water] Insoluble] false 純度: 99.07%
99.07

Seletalisib (UCB-5857)関連製品

シグナル伝達経路

PI3K阻害剤の選択性比較

生物活性

製品説明 Seletalisib (UCB-5857) is a novel small-molecule inhibitor of PI3Kδ with an IC50 value of 12 nM and shows significant selectivity to PI3Kδ with respect to the other class I PI3K isoforms (between 24- and 303-fold).
Targets
PI3Kδ [1]
(Cell-free assay)
PI3Kγ [1]
(Cell-free assay)
12 nM 282 nM
In Vitro
In vitro

Seletalisib is a potent, ATP-competitive, and selective PI3Kδ inhibitor able to block protein kinase B (AKT) phosphorylation following activation of the B-cell receptor in a B-cell line. Moreover, seletalisib inhibited N-formyl peptide-stimulated but not phorbol myristate acetate–stimulated superoxide release from human neutrophils, consistent with a PI3Kδ-specific activity. Findings from cellular assays of adaptive immunity demonstrated that seletalisib blocks human T-cell production of several cytokines from activated T-cells. Additionally, seletalisib inhibited B-cell proliferation and cytokine release. In human whole blood assays, seletalisib inhibited CD69 expression upon B-cell activation and anti-IgE-mediated basophil degranulation. From 239 kinases screened, seletalisib at a concentration of 10 μM showed no inhibitory activity greater than 47% (MAP4K4) against non-PI3K kinase enzymes. Against nonkinase enzymes, seletalisib showed weak activities against phosphodiesterase (PDE)3A, PDE2A1, and PDE4D2, with inhibition varying between 32 and 74% at 10 μM. When screened at a concentration of 10 μM against 55 receptors and ion channels, the highest inhibitory activity of seletalisib observed was 20%. One receptor, neuropeptide Y receptor (Y1) showed 54% activation. In vitro receptor binding and enzyme assays across a broad range of target classes showed that seletalisib is selective for PI3Kδ. Seletalisib potently inhibited the phosphorylation of AKT following anti-IgM stimulation of the BCR on Ramos cells with an IC50 of 15 nM[1]. When profiled in a wide range of primary cell assay systems, including fibroblasts, epithelial, endothelial and vascular smooth muscle cells, seletalisib showed significant activity only in those systems containing lymphocytes, demonstrating its functional selectivity towards PI3Kδ-expressing cells[2].

Kinase Assay In Vitro Kinase Activity Assays and Off-Target Profiling
The activities of seletalisib and the pan-PI3K inhibitor UCB1370037 were tested in biochemical kinase assays of the PI3Kα, PI3Kβ, PI3Kδ and PI3Kγ (manufactured in-house) isoforms. Competitive time-resolved (TR) fluorescence resonance energy transfer (FRET) assays using a four-step PI3K assay reagent kit were performed. In this assay, PI3K activity is measured by the detection of phosphatidylinositol triphosphate (PIP3) as follows: A complex is formed between biotinylated PIP3 and a glutathione S-transferase (GST)-tagged pleckstrin homology–domain protein, which are detected by streptavidin-allophycocyanin (APC) and europium-labeled anti-GST antibody, respectively. Proximity of the two fluorophores results in a stable TR-FRET signal. The production of unlabeled PIP3 by PI3K in the kinase reaction results in competitive inhibition of the complex and therefore the FRET signal. Briefly, 2 μl of compound was added to wells containing 8 μl of a mixture containing phosphatidylinositol bisphosphate (PIP2) substrate and ATP, before addition of 10 μl of PI3K (prediluted to the required concentration). The final assay concentrations of ATP and PIP2 substrate were 2 μM and 10 μM, respectively. The final assay concentration of PI3K enzymes was 1–8 nM depending on batch activity. The final assay concentration of DMSO was 2.0%. The plate was incubated at room temperature for 30 minutes before addition of stop buffer and detection buffer according to manufacturer instructions, and the plate was then incubated for a further 6 hours at room temperature. TR-FRET measurements were performed on an Analyst GT plate reader. The ATP concentration dependence of the activity of seletalisib against PI3Kδ was established by running the assay in the presence of varying ATP concentrations (2, 40, 200, and 1000 μM). The final assay concentrations of PI3Kδ and PIP2 substrate in these assays were 1 nM and 25 μM, respectively.
細胞実験 細胞株 Ramos B-cell line
濃度 0.1 nM-10 μM
反応時間 10 min
実験の流れ

Serially diluted seletalisib and goat anti-human F(ab)2 IgM in serum-free RPMI 1640 were added to Ramos cells plated in serum-free RPMI 1640. The plate was incubated for 10 minutes, chilled on ice, and the cells pelleted by centrifugation. Cellular phosphorylated AKT was detected by MSD assay.

In Vivo
In Vivo

Seletalisib shows dose-dependent inhibition in an in vivo rat model of anti-CD3-antibody-induced interleukin 2 release. Analysis of the relationship between inhibition of IL-2 release and seletalisib blood concentration, using combined data across experiments, demonstrated that seletalisib has potent in vivo effects with an estimated IC50 value of <10 nM[1]. In first-in-man studies, mean seletalisib plasma concentration-time profiles increased with increasing dose after single and multiple dosing, with no major deviations from dose proportionality. There was no unexpected accumulation or loss of exposure after multiple dosing (time-independent pharmacokinetic (PK) profile) and apparent t1/2 values (approx. 20h) were supportive of once-daily dosing[2].

動物実験 動物モデル Adult Lewis rats (male, 6-8 weeks of age)
投与量 0.1-10 mg/kg in 500 μl volume
投与経路 via oral gavage
NCT Number Recruitment Conditions Sponsor/Collaborators Start Date Phases
NCT02207595 Completed
Healthy Volunteers
UCB Celltech|Parexel|UCB Pharma
August 2014 Phase 1
NCT02303509 Completed
Psoriasis
UCB Pharma|Parexel
August 2013 Phase 1

化学情報

分子量 482.85 化学式

C23H14ClF3N6O

CAS No. 1362850-20-1 SDF --
Smiles C1=CC2=CC(=C(N=C2C(=C1)Cl)C3=C[N+](=CC=C3)[O-])C(C(F)(F)F)NC4=NC=NC5=C4N=CC=C5
保管 3 years -20°C powder

In vitro
Batch:

DMSO : 97 mg/mL ( (200.89 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 97 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Seletalisib (UCB-5857)を買う | Seletalisib (UCB-5857) ic50 | Seletalisib (UCB-5857)供給者 | Seletalisib (UCB-5857)を購入する | Seletalisib (UCB-5857)費用 | Seletalisib (UCB-5857)生産者 | オーダーSeletalisib (UCB-5857) | Seletalisib (UCB-5857)化学構造 | Seletalisib (UCB-5857)分子量 | Seletalisib (UCB-5857)代理店