5-Fluoroorotic acid

別名:5-FOA, 5-Fluoroorotate, NSC 31712

5-Fluoroorotic acid (5-FOA, 5-Fluoroorotate, NSC 31712) is a selective agent in yeast molecular genetics. 5-Fluoroorotic acid possesses a well-expressed anticandidal effect close to that of 5-fluorocytosine, as well as moderate antidermatophytal effects.

5-Fluoroorotic acid化学構造

CAS No. 703-95-7

サイズ 価格(税別) 在庫状況
JPY 16200 国内在庫あり

代表番号: 045-509-1970|電子メール:sales@selleck.co.jp
よく尋ねられる質問

製品安全説明書

現在のバッチを見る: S987301 DMSO] 35 mg/mL] false] Water] Insoluble] false] Ethanol] Insoluble] false 純度: 99.99%
99.99

5-Fluoroorotic acid関連製品

生物活性

製品説明 5-Fluoroorotic acid (5-FOA, 5-Fluoroorotate, NSC 31712) is a selective agent in yeast molecular genetics. 5-Fluoroorotic acid possesses a well-expressed anticandidal effect close to that of 5-fluorocytosine, as well as moderate antidermatophytal effects.
In Vitro
In vitro

5-Fluoroorotic acid (5-FOA) is an extremely useful reagent for the selection of Ura- cells amid a population of Ura+ cells. The selection is effective in transformation and recombination studies where loss of URA3+ is desired. A new plasmid shuffling procedure based on the 5-FOAR selection permits the recovery of conditional lethal mutations in cloned genes that encode vital functions.[1]

細胞実験 細胞株 Yeast cells
濃度 1 mg/ml, 500 μg/ml
反応時間 4-7 days
実験の流れ

Yeast cells are generally pregrown in liquid YPD medium or on YPD plates prior to selection on 5-Fluoroorotic acid. As many as 107 cells may be plated on a single, 50 mm Petri dish containing this compound medium. Resistant colonies will grow up within 4-7 days at 30°. The most useful concentration of the drug is generally 1 mg/ml of this chemical, but in the interest of economy it is possible to use as little as 500 μg/ml of this compound. When lower concentrations of this chemical are used, however, background growth of the Ura+ cells is considerably greater. This background growth is less of a problem when Ura- derivatives occur at a high frequency (e.g., when a URA3+ marker is located between the elements of a direct duplication). In some instances it may be desirable to use a rich medium such as YPD as opposed to the minimal medmm normally used with this compound selection.

  • https://pubmed.ncbi.nlm.nih.gov/3323810/
  • https://pubmed.ncbi.nlm.nih.gov/3586772/

化学情報

分子量 174.09 化学式

C5H3FN2O4

CAS No. 703-95-7 SDF --
Smiles OC(=O)C1=C(F)C(=O)NC(=O)N1
保管 3 years -20°C powder

In vitro
Batch:

DMSO : 35 mg/mL ( (201.04 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Water : Insoluble

Ethanol : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください