Auxinole

Auxinole is a potent auxin antagonist that binds to TIR1 and blocks the formation of the TIR1-IAA-Aux/IAA complex. Auxinole is an OsTIR1 inhibitor that suppresses leaky degradation of degron-fused proteins.

Auxinole化学構造

CAS No. 86445-22-9

サイズ 価格(税別) 在庫状況
JPY 16200 国内在庫なし(納期7~10日)
JPY 44700 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

製品安全説明書

現在のバッチを見る: S696001 DMSO] 64 mg/mL] false] Ethanol] 5 mg/mL] false] Water] Insoluble] false 純度: 99.91%
99.91

Auxinole関連製品

生物活性

製品説明 Auxinole is a potent auxin antagonist that binds to TIR1 and blocks the formation of the TIR1-IAA-Aux/IAA complex. Auxinole is an OsTIR1 inhibitor that suppresses leaky degradation of degron-fused proteins.
In Vitro
In vitro

Auxinole causes reduction in IAA-triggered depolarization in root hair cells. Auxinole (20 µM) also represses the transient increase in [Ca2+]cyt completely, and blocks Ca2+ response.[4]

細胞実験 細胞株 Root epidermal cells of Arabidopsis thaliana
濃度 20 µM
反応時間 1-10 min
実験の流れ

Sterile grown seedlings are exposed to standard bath solution (0.1 mM KCl, 1 mM CaCl2, 5 mM MES/BTP pH 5.5; in the case of La3+-containing bath solutions ionic strength is kept constant and the sum of La3+ and Ca2+ concentrations is 1 mM). The response of the membrane potential of root epidermal cells to apoplastic and cytosolic auxin application is measured by sharp single- and double-barreled microelectrodes impaled through the tip of bulging root-hair cells. Ion fluxes across the plasma membrane of root epidermal cells are monitored using non-invasive ion-selective scanning microelectrodes.

化学情報

分子量 321.37 化学式

C20H19NO3

CAS No. 86445-22-9 SDF --
Smiles CC1=CC(=C(C=C1)C(=O)CC(C(O)=O)C2=C[NH]C3=C2C=CC=C3)C
保管 3 years -20°C powder

In vitro
Batch:

DMSO : 64 mg/mL ( (199.14 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 5 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Auxinoleを買う | Auxinole ic50 | Auxinole供給者 | Auxinoleを購入する | Auxinole費用 | Auxinole生産者 | オーダーAuxinole | Auxinole化学構造 | Auxinole分子量 | Auxinole代理店