Selective JAK3 inhibitor 1

Selective JAK3 inhibitor 1 is an irreversible JAK3 inhibitor with Ki values of 0.07 nM, 320 nM, 740 nM for JAK3, JAK1 and JAK2 respectively. It is also selective over the other kinases possessing a cysteine in the same region as JAK3, such as BMX, EGFR, ITK, and BTK.

Selective JAK3 inhibitor 1化学構造

CAS No. 1443235-95-7

サイズ 価格(税別) 在庫状況
JPY 15900 国内在庫あり
JPY 44700 国内在庫あり

代表番号: 045-509-1970|電子メール:[email protected]
よく尋ねられる質問

文献中Selleckの製品使用例(1)

製品安全説明書

現在のバッチを見る: S868401 DMSO] 70 mg/mL] false] Ethanol] 9 mg/mL] false] Water] Insoluble] false 純度: 99.71%
99.71

Selective JAK3 inhibitor 1関連製品

シグナル伝達経路

JAK阻害剤の選択性比較

生物活性

製品説明 Selective JAK3 inhibitor 1 is an irreversible JAK3 inhibitor with Ki values of 0.07 nM, 320 nM, 740 nM for JAK3, JAK1 and JAK2 respectively. It is also selective over the other kinases possessing a cysteine in the same region as JAK3, such as BMX, EGFR, ITK, and BTK.
Targets
JAK3 [1]
(Cell-free assay)
JAK1 [1]
(Cell-free assay)
JAK2 [1]
(Cell-free assay)
0.07 nM(Ki) 320 nM(Ki) 740 nM(Ki)
In Vitro
In vitro

Selective JAK3 inhibitor 1 is a potent inhibitor of JAK3 (IC50 = 0.15 nM) was 4300-fold selective for JAK3 over JAK1 in enzyme assays, 67-fold [interleukin (IL)-2 versus IL-6] or 140-fold [IL-2 versus erythropoietin or granulocyte-macrophage colony-stimulating factor (GMCSF)] selective in cellular reporter assays and >35-fold selective in human peripheral blood mononuclear cell assays (IL-7 versus IL-6 or GMCSF). The compound blocks cytokine signaling through JAK3, but not through other JAK family enzymes. It inhibits IL-7, IL-15, and IL-2 signaling in T cells, but does not inhibit any other cytokine signaling pathways[1].

In Vivo
In Vivo

Selective JAK3 inhibitor 1 has a partial effect on reversing inflammation and bone loss in the rat CIA model when administered therapeutically during the inflammatory phase of the model at doses that meet or exceed the exposure required for complete inhibition of the phenotype when dosed prophylactically. It inhibits leukocyte proliferation, but not erythrocyte proliferation in rats. Selective JAK3 inhibitor 1 could fully inhibit the development of inflammation[1].

化学情報

分子量 350.37 化学式

C19H18N4O3

CAS No. 1443235-95-7 SDF --
Smiles CCOC(=O)C1=CNC2=NC=NC(=C12)C3=CC(=CC=C3)NC(=O)C(=C)C
保管 3 years -20°C powder

In vitro
Batch:

DMSO : 70 mg/mL ( (199.78 mM); 吸湿したDMSOは溶解度を減少させます。新しいDMSOをご使用ください。)

Ethanol : 9 mg/mL

Water : Insoluble

モル濃度計算器

in vivo
Batch:

Add solvents to the product individually and in order.

投与溶液組成計算機

実験計算

モル濃度計算器

質量 濃度 体積 分子量

投与溶液組成計算機(クリア溶液)

ステップ1:実験データを入力してください。(実験操作によるロスを考慮し、動物数を1匹分多くして計算・調製することを推奨します)

mg/kg g μL

ステップ2:投与溶媒の組成を入力してください。(ロット毎に適した溶解組成が異なる場合があります。詳細については弊社までお問い合わせください)

% DMSO % % Tween 80 % ddH2O
%DMSO %

計算結果:

投与溶媒濃度: mg/ml;

DMSOストック溶液調製方法: mg 試薬を μL DMSOに溶解する(濃度 mg/mL, 注:濃度が当該ロットのDMSO溶解度を超える場合はご連絡ください。 )

投与溶媒調製方法:Take μL DMSOストック溶液に μL PEG300,を加え、完全溶解後μL Tween 80,を加えて完全溶解させた後 μL ddH2O,を加え完全に溶解させます。

投与溶媒調製方法:μL DMSOストック溶液に μL Corn oil,を加え、完全溶解。

注意:1.ストック溶液に沈殿、混濁などがないことをご確認ください;
2.順番通りに溶剤を加えてください。次のステップに進む前に溶液に沈殿、混濁などがないことを確認してから加えてください。ボルテックス、ソニケーション、水浴加熱など物理的な方法で溶解を早めることは可能です。

技術サポート

ストックの作り方、阻害剤の保管方法、細胞実験や動物実験の際に注意すべき点など、製品を取扱う時に問い合わせが多かった質問に対しては取扱説明書でお答えしています。

Handling Instructions

他に質問がある場合は、お気軽にお問い合わせください。

* 必須

大学・企業名を記入してください
名前を記入してください
電子メール・アドレスを記入してください 有効なメールアドレスを入力してください
お問い合わせ内容をご入力ください
Tags: Selective JAK3 inhibitor 1を買う | Selective JAK3 inhibitor 1 ic50 | Selective JAK3 inhibitor 1供給者 | Selective JAK3 inhibitor 1を購入する | Selective JAK3 inhibitor 1費用 | Selective JAK3 inhibitor 1生産者 | オーダーSelective JAK3 inhibitor 1 | Selective JAK3 inhibitor 1化学構造 | Selective JAK3 inhibitor 1分子量 | Selective JAK3 inhibitor 1代理店